🌐 🇬🇧 English ▾
bcs100_alarm_found_network_failed · EQUIPMENT_ALARM

BCS100 Alarm Found, NETWORK FAILED

Causes

  • Loss of communication with the height sensor or BCS100 sensor

Solutions

  1. In CypConfig, open the FOLLOWER (BCS100) tab and click TEST CONNECT
  2. If the test is successful, resume operation
  3. If the connection test fails, check the IP address of the BCS100 height sensor in the network devices on the computer
  4. Set the IP address so that the last octet differs by no more than 10 — Example: BCS100 control panel shows 10.1.1.188; computer network devices should show 10.1.1.187