Chiller errors
Hanli 21
- AO A0 ambient temperature sensor fault signal. ›
- E01 Low-temperature circuit temperature sensor fault (source). ›
- E02 Extremely high temperature in the low-temperature circuit (source). ›
- E03 Compressor pressure fault / Low voltage. ›
- E04 Phase sequence error or phase loss. ›
- E05 Low-temperature circuit flow alarm (source). ›
- E06 Water pump overload / Water level sensor. ›
- E07 Compressor overload / High system pressure. ›
- E08 Extremely low temperature in the low-temperature circuit (source). ›
- E09 Normal-temperature circuit temperature sensor fault (head). ›
- E10 Ultra-high temperature in the normal-temperature circuit (head) ›
- E11 Ultra-low temperature in the normal-temperature circuit (head) ›
- E12 Flow level alarm in the normal-temperature circuit (head) ›
- ER01 Coolant flow level alarm in the laser source circuit ›
- ER02 Condensate level alarm / High temperature ›
- ER03 Water pump thermal relay fault alarm ›
- ER05 Coolant temperature exceeds upper limit ›
- ER06 Coolant flow level alarm in the cutting head circuit ›
- ER07 Low fluid level ›
- ER08 LP (low pressure) alarm ›
- FO F0 temperature sensor fault signal. ›
S&A 41
- E00 Communication fault alarm. ›
- E01 Laser source line coolant flow level alarm. ›
- E02 Cutting head line coolant flow level alarm. ›
- E03 Ambient temperature critically high alarm. ›
- E04 Laser source line temperature critically low alarm. ›
- E05 Laser source line temperature critically high alarm. ›
- E06 Cutting head line temperature critically low alarm. ›
- E07 Cutting head line temperature critically high alarm. ›
- E08 Incorrect phase sequence or phase loss. ›
- E09 Compressor overload ›
- E1 Ambient temperature high alarm ›
- E10 Laser source line pump overload ›
- E13 Refrigeration system low-pressure alarm ›
- E14 Ambient temperature sensor fault ›
- E15 Source line temperature sensor fault ›
- E16 Head line temperature sensor fault ›
- E17 Coolant conductivity too high ›
- E18 Coolant conductivity too low ›
- E19 Coolant level critically low ›
- E2 Laser source line temperature too high — alarm ›
- E20 Post-radiator air temperature sensor fault ›
- E21 Post-radiator air temperature too high ›
- E3 Laser source line temperature too low — alarm ›
- E4 Head line temperature too high — alarm ›
- E5 Head line temperature too low — alarm ›
- E6 Ambient temperature sensor failure. ›
- E7 Laser source line coolant temperature sensor failure. ›
- E8 Cutting head line coolant temperature sensor failure. ›
- E9 Coolant level alarm. ›
- Е1 Extremely high ambient temperature alarm. ›
- Е2 Extremely high water temperature alarm. ›
- Е3 Extremely low water temperature alarm. ›
- Е4 Ambient temperature sensor failure. ›
- Е5 Coolant temperature sensor failure. ›
- Е6 Coolant flow level alarm. ›
- Е7 Coolant level alarm. ›
- Е8 Pump failure. ›
- E11 Coolant flow alarm on the laser source line ›
- E11 Pump overload on the cutting head line ›
- E12 Coolant flow alarm on the cutting head line ›
- E12 High pressure alarm in the refrigeration system ›
Tongfei 16
- E01 Ambient temperature sensor fault ›
- E02 Laser source line temperature sensor fault ›
- E03 Cutting head line temperature sensor fault ›
- E08 Power phase loss ›
- E09 Incorrect phase sequence ›
- E10 Low coolant level ›
- E11 Low compressor pressure ›
- E12 High compressor pressure ›
- E13 / E17 Coolant flow alarm — laser source line ›
- E14 / E18 Coolant flow alarm — cutting head line ›
- E16 Pump overload ›
- E19 Compressor overload ›
- E35 Critically high temperature alarm — cutting head line ›
- E45 Critically high temperature alarm — laser source line ›
- E53 Critically low temperature alarm — cutting head line ›
- E54 Critically low temperature alarm — laser source line ›
SCH-2000 13
- E01 Low temperature water probe failure ›
- E02 Normal temperature water probe failure ›
- E03 Ambient temperature probe failure ›
- E11 Low temperature water — high temperature alarm ›
- E12 Low temperature water — low temperature alarm ›
- E13 Normal temperature water — high temperature alarm ›
- E14 Normal temperature water — low temperature alarm ›
- E15 High ambient temperature alarm ›
- E16 Low temperature water flow protection ›
- E18 Normal temperature water flow protection ›
- E20 Compressor fault protection ›
- Err Data storage exception ›
- — Abnormal communication ›