❌ أخطاء حركة المحور

Axis movement errors (Axis Alarm)

Limit errors occur due to exceeding software coordinates (SOFT LIMIT) or physical contact with a limit sensor (AXIS LIMIT). Errors can occur simultaneously.

❗SOLUTIONS❗
(follow the order until the error is fixed)

1) Move the portal away from the machine edge with the controller or from the program;
2) Return all axes to the origin position (RETURN TO ORIGIN, you can see how to do this in the video by clicking the button below);
3) Replace the limit sensor with a new one if broken;
4) Clean cutting products from the limit sensor.

❗CAUSES❗

1) The portal mechanically broke the sensor — common with inductive limit sensors that "lose their head" due to incorrectly set distance or loose mounting.
OR wires rubbed through;

2) Inductive sensor didn't trigger due to incorrectly set distance;

3) Mechanical limit sensor jammed from accumulated soot.