ऊंचाई सेंसर
Height Sensor
The laser head is equipped with a sensor that creates induction through the nozzle assembly and determines the distance to the metal.
FsCUT control boards have 2 systems:
1) their own;
2) BCS100.
Proprietary metal tracking systems have been installed recently.
BCS100 is a separate module that contains a Z-axis control system. It tracks the distance to the metal with an accuracy of one hundredth of a millimeter.
Manufacturers with proprietary software also have their own tracking sensors, such as BODOR or HSG.
The most common on the market is the BCS100 sensor.
Tracking sensor operation principle:
1) When the cutting head descends to the metal sheet at a distance of 10-20 mm, the sensor inside the nozzle assembly catches the induction response signal through the nozzle — capacitance to the metal;
2) From the nozzle assembly, the signal is transmitted to the amplifier through a coaxial optical cable;
3) From the amplifier, the signal arrives at the module (e.g., BCS100) through an information cable, where it is converted to data and transmitted to the computer.
The laser head is equipped with a sensor that creates induction through the nozzle assembly and determines the distance to the metal.
FsCUT control boards have 2 systems:
1) their own;
2) BCS100.
Proprietary metal tracking systems have been installed recently.
BCS100 is a separate module that contains a Z-axis control system. It tracks the distance to the metal with an accuracy of one hundredth of a millimeter.
Manufacturers with proprietary software also have their own tracking sensors, such as BODOR or HSG.
The most common on the market is the BCS100 sensor.
Tracking sensor operation principle:
1) When the cutting head descends to the metal sheet at a distance of 10-20 mm, the sensor inside the nozzle assembly catches the induction response signal through the nozzle — capacitance to the metal;
2) From the nozzle assembly, the signal is transmitted to the amplifier through a coaxial optical cable;
3) From the amplifier, the signal arrives at the module (e.g., BCS100) through an information cable, where it is converted to data and transmitted to the computer.