Module 3 · Parameter tables

Handheld laser cleaning settings for rust, paint and coatings

Short answer

The laser cleaning table in SBM Laser Help gives 15 ready modes for handheld fiber laser cleaners from 500 W to 3 kW: light rust, heavy rust and corrosion, paint and coating removal. Pick your source power and see power, speed, scan width, frequency and productivity. It lives in the app for Android and iOS, the web app and the Telegram bot, free on every plan.

Where
Android, iOS, web app, Telegram bot
Free plan
Free, no monthly limit
Paid plans
Free as well, no limit
Languages
12
Get it on your phone or open it in the browser
Also in Telegram
Laser cleaning modes for a 1.5 kW source in the SBM Laser Help web app
Laser cleaning modes for a 1.5 kW source in the SBM Laser Help web app

What the laser cleaning table gives you

15 modes for 6 power levels

Modes for 500 W, 650 W, 1 kW, 1.5 kW, 2 kW and 3 kW handheld cleaners. Pick the source power and see all modes for it at once, from one to four.

Rust, corrosion, paint, coating

Light rust (0.02 and 0.1 mm layers), heavy rust and corrosion (0.12 mm), paint and coating (0.1 mm), automotive paint (0.4 mm) and heavy paint or coating deposits up to 1.5 mm.

Nine settings per mode

Power, layer thickness, cleaning speed, productivity in m²/h, scan width, scanning frequency, duty cycle, frequency and end point optimization.

Productivity you can plan with

Each mode states the area it cleans per hour, from 0.5 m²/h for a 1.5 mm coating to 30 m²/h for light rust on a 3 kW cleaner. Use it to quote a job or choose a cleaner.

Welding gun as a cleaner

The Laser welding section of the Reference Guide explains how to switch a SUPLASER welding gun to cleaning: software switch, F150, F400 or F800 lens, focal distance and air pressure.

How to get a cleaning mode

  1. Open Laser cleaningIn the menu open Cutting/Piercing Parameters Tables and tap Laser cleaning.
  2. Pick the source powerChoose the power of your cleaner under Source power. The modes for that power appear below.
  3. Match the mode to the jobEach card is named by the job and layer, for example Light rust, 0.02 mm layer. Read power, speed, scan width and frequency and set them on the cleaner.

Open in the web app →

Sample rows from the laser cleaning table

  • 500 W, light rust removal, 0.1 mm layer: cleaning speed 15 mm/s, productivity 1 m²/h, scan width 100 mm, scanning frequency 80 Hz, duty cycle 85%, frequency 5000 Hz.
  • 650 W, automotive paint removal, 0.4 mm layer: cleaning speed 20 mm/s, productivity 0.65 m²/h, scan width 100 mm, scanning frequency 80 Hz, duty cycle 90%, frequency 1000 Hz.
  • 1 kW, heavy rust / corrosion, 0.12 mm layer: cleaning speed 25 mm/s, productivity 2.5 m²/h, scan width 150 mm, scanning frequency 80 Hz, duty cycle 90%, frequency 800 Hz.
  • 2 kW, heavy paint / coating removal, 1.5 mm layer: cleaning speed 15 mm/s, productivity 0.5 m²/h, scan width 10 mm, scanning frequency 100 Hz, duty cycle 100%, frequency 800 Hz.
  • 3 kW, light rust, 0.02 mm layer: cleaning speed 50 mm/s, productivity 30 m²/h, scan width 300 mm, scanning frequency 100 Hz, duty cycle 100%, frequency 5000 Hz.

A pattern runs through the table: high pulse frequency (5000 Hz) for thin rust, 1000 Hz for paint, 800 Hz for heavy rust and thick coatings.

Productivity by cleaner power

  • Light rust, 0.02 mm: 6 m²/h on 1 kW, 15 m²/h on 1.5 kW, 20 m²/h on 2 kW, 30 m²/h on 3 kW.
  • Paint / coating, 0.1 mm: 4 m²/h on 1 kW, 6 m²/h on 1.5 kW, 8 m²/h on 2 kW, 14 m²/h on 3 kW.
  • Heavy rust / corrosion, 0.12 mm: 2.5 m²/h on 1 kW, 4 m²/h on 1.5 kW, 5 m²/h on 2 kW, 9 m²/h on 3 kW.

Limits by plan

ToolFreeOperatorEngineerProfessional
Laser cleaning tableFreeFreeFreeFree
Engraving parameters tableFreeFreeFreeFree
Laser welding table1050100∞

The laser cleaning table has no quota on any plan. Welding limits renew every 30 days from signup or renewal.

Prices: Operator $3.99, Engineer $7.99, Professional $14.99 a month. Compare plans.

Questions and answers

What are the best laser cleaning parameters for rust removal?
For light rust on a 1 kW cleaner the table gives cleaning speed 25 mm/s, scan width 150 mm, scanning frequency 80 Hz, duty cycle 90% and pulse frequency 5000 Hz, about 6 m²/h. For heavy rust drop the frequency to 800 Hz. The SBM Laser Help app shows the mode for your exact cleaner power.
What power laser cleaner do I need to remove paint?
A 1 kW cleaner removes a 0.1 mm paint layer at about 4 m²/h, a 3 kW cleaner at about 14 m²/h. For thick deposits up to 1.5 mm the table uses a 2 kW mode with a narrow 10 mm scan width and full duty cycle, at about 0.5 m²/h.
What frequency should I use for laser cleaning?
In the SBM Laser Help table, thin rust uses 5000 Hz, paint and coating 1000 Hz, heavy rust, corrosion and thick coatings 800 Hz. Scanning frequency of the galvo is 80 Hz on cleaners up to 1.5 kW and 100 Hz on 2 and 3 kW.
How fast is laser rust removal?
From 1 m²/h on a 500 W cleaner on a 0.1 mm rust layer up to 30 m²/h on a 3 kW cleaner on light rust. The productivity of every mode is listed in the app.
Is the laser cleaning table free?
Yes. Laser cleaning modes are free on every plan, Free included, with no monthly limit, in the Android and iOS apps, the web app and the Telegram bot.
Can I use a handheld laser welder for cleaning?
Some can: SUPLASER guns such as SUP21T, SUP22C, SUP23T and SUP28F switch to cleaning. The Reference Guide in SBM Laser Help explains the software switch, the choice of F150, F400 or F800 lens, how to find the focus and that 0.5-1 bar of dry, oil-free air is enough.

Clean with the right settings

Install SBM Laser Help and open free laser cleaning modes for your cleaner on your phone or in the browser.