Module 3 · Parameter tables

Handheld laser welding parameters by metal, thickness and power

Short answer

The laser welding table in SBM Laser Help gives 186 ready modes for handheld fiber laser welders: carbon steel, stainless steel and aluminum from 0.5 to 8 mm, 1 to 3 kW sources, without wire, single or double wire feed. It lives in the app for Android and iOS, the web app and the Telegram bot. The Free plan includes 10 welding lookups a month.

Where
Android, iOS, web app, Telegram bot
Free plan
10 welding lookups a month
Paid plans
50, 100 or unlimited a month
Languages
12
Get it on your phone or open it in the browser
Also in Telegram
Laser welding settings for 2 mm stainless steel with single wire feed on a 1.5 kW source in the SBM Laser Help web app
Laser welding settings for 2 mm stainless steel with single wire feed on a 1.5 kW source in the SBM Laser Help web app

What the welding table gives you

186 modes, 160 combinations

Source power 1, 1.5, 2 or 3 kW; carbon steel, stainless steel, aluminum and aluminum 5 series; thickness from 0.5 to 8 mm. For 26 combinations there are two modes, one per gun.

With or without wire

Three wire feed options: Without wire, Single wire feed and Double wire feed. Modes with wire give wire feed speed, wire type and diameter: stainless steel, copper-coated for carbon steel, or aluminum.

Two gun makers

Modes are set for Raytools F60/F150 and Suplaser SUP20 welding heads. The gun is named on top of each mode card, so you can compare both for the same job.

Full set of settings

Welding power, scan speed, scan width, wobble frequency, focus, duty cycle, frequency, wire feed speed, wire, penetration, shielding gas, gas flow and gas purity.

Laser welding guide

The Reference Guide has a Laser welding section: How to choose a nozzle (8 copper nozzles by seam and wire), Setting up handheld laser cutting, Fish scale weld and Switching the gun to cleaning.

How to get a welding mode

  1. Open Laser weldingIn the menu open Cutting/Piercing Parameters Tables and tap Laser welding.
  2. Pick four valuesChoose Source power, Material, Wire feed and Thickness. Each row narrows to what exists for your earlier choice.
  3. Read the modeThe mode cards appear below, one per gun. Notes under a card tell you when fine tuning is needed, for example on aluminum.
  4. Check the nozzleTap How to choose a nozzle above the table to open the nozzle guide, then Reset to pick another combination.

Open in the web app →

Materials, thickness and power covered

  • Stainless steel: 74 modes, 0.5-8 mm.
  • Carbon steel: 62 modes, 1-8 mm.
  • Aluminum 5 series: 26 modes, 1-4 mm (Raytools).
  • Aluminum: 24 modes, 1-6 mm (Suplaser).

Maximum thickness grows with the source: up to 2 mm on 1 kW, 4 mm on 1.5 kW, 5 mm on 2 kW and 8 mm on 3 kW. Welding power in the modes runs from 260 W to 3,000 W. Shielding gas is nitrogen or argon, with CO2 as a third option for carbon steel; gas flow 15-20 L/min.

Sample rows from the laser welding table

  • Stainless steel 2 mm, 2 kW, without wire, Raytools: welding power 1000 W, scan speed 14 mm/s, scan width 2 mm, wobble 100 Hz, focus 0 mm, duty cycle 100%, frequency 1000 Hz, N2/Ar 20 L/min, penetration 2 mm.
  • Stainless steel 2 mm, 2 kW, single wire feed, Raytools: welding power 1000 W, scan speed 300 mm/s, scan width 2.5 mm, wobble 70 Hz, focus -2 mm, wire feed 14 mm/s, stainless steel wire 1.0 mm, N2/Ar 20 L/min, penetration 2 mm.
  • Stainless steel 2 mm, 2 kW, single wire feed, Suplaser SUP20: welding power 700 W, scan speed 300 mm/s, scan width 3 mm, wobble 70 Hz, focus -2 mm, frequency 2000 Hz, wire feed 10 mm/s, stainless steel wire 1.0 mm, N2/Ar 15-20 L/min.
  • Carbon steel 2 mm, 1.5 kW, without wire, Raytools: welding power 1000 W, scan speed 16 mm/s, scan width 2 mm, wobble 100 Hz, focus +1 mm, N2/Ar/CO2 20 L/min, penetration 2 mm.
  • Carbon steel 6 mm, 3 kW, double wire feed, Suplaser SUP20: welding power 2200 W, scan speed 200 mm/s, scan width 7 mm, wobble 50 Hz, focus +2 mm, frequency 2000 Hz, wire feed 8 mm/s, copper-coated wire 1.6 mm, N2/Ar/CO2 15-20 L/min.

Laser output power varies between machines, so treat every mode as a starting point and fine tune it on a test piece.

Limits by plan

ToolFreeOperatorEngineerProfessional
Laser welding table1050100∞
Laser cleaning tableFreeFreeFreeFree

Limits renew every 30 days from signup or renewal. Opening the list of combinations is free; a lookup is counted when the modes for a combination are shown.

Prices: Operator $3.99, Engineer $7.99, Professional $14.99 a month. Compare plans.

Questions and answers

What is the best laser welding parameter for 2 mm stainless steel?
Without wire on a Raytools gun, start with 1000 W, scan speed 14 mm/s, scan width 2 mm, wobble 100 Hz, focus 0 and nitrogen or argon at 20 L/min. With single wire feed the table gives 1000 W, scan width 2.5 mm, wobble 70 Hz, focus -2 mm and 1.0 mm stainless wire at 14 mm/s. The SBM Laser Help app shows the mode for your exact source power and gun.
What power handheld laser welder do I need for 6 mm steel?
In the SBM Laser Help table, 6 mm and thicker carbon and stainless steel modes appear only for a 3 kW source, with wire feed. A 2 kW source covers up to 5 mm, 1.5 kW up to 4 mm and 1 kW up to 2 mm.
Which gas is used for handheld laser welding?
Nitrogen or argon for stainless steel and aluminum, and nitrogen, argon or CO2 for carbon steel. The modes give 15-20 L/min flow and 99.99% or higher gas purity.
What wire should I use for laser welding carbon steel?
The table uses copper-coated wire for carbon steel, stainless steel wire for stainless and aluminum wire for aluminum, 0.8 to 2 mm in diameter depending on thickness. The mode card names the wire and its diameter.
Are laser welding parameters for aluminum reliable?
Use them as a starting point. Some aluminum modes in the table are derived from stainless steel, with 20-30% more power and a different focus, and the app marks them with a note that manual tuning is required.
Is the laser welding table free?
The Free plan gives 10 welding lookups a month. Operator gives 50, Engineer 100 and Professional is unlimited. Laser cleaning modes are free on every plan. See pricing.

Weld with a tested mode

Install SBM Laser Help and get the welding mode for your source, gun, metal and thickness in a few taps.