Reference guide for fiber laser cutting machine operators
The Reference guide in SBM Laser Help is a library for fiber laser operators and service staff: 29 theory topics, maintenance guides for the main machine units, troubleshooting articles, 156 chiller, servo and machine error codes, and a laser welding guide. It lives in the SBM Laser Help app for Android and iOS, the web app and the Telegram bot. Theory, maintenance and error codes are free on every plan.
- Where
- Android, iOS, web app, Telegram bot
- Free plan
- Theory, maintenance, error codes
- Paid plans
- Full laser welding guide from Operator
- Languages
- 12
What is in the Reference guide
Theory materials
29 topics in 7 groups: electrics and electronics, laser and optics, mechanics and frame, gas and cooling, cutting theory and quality, material defects, and operator safety.
Laser machine maintenance
Step-by-step care for water cooling (chiller), rack gear, cutting head, beam centering, laser source and rails, plus gas proportional valve calibration and pendant button programming in CypCut.
Problems and solutions
Troubleshooting articles for the most common stops: Fly Cut error, axis movement errors, capacitive height sensor ("capacitance diminished") and laser source errors.
156 equipment error codes
Each code has its meaning, likely causes and what to check: 28 Fuji servo drive alarms, 91 chiller codes for S&A, Hanli, Tongfei and SCH-2000, and 37 machine alarms.
Laser welding guide
How to choose a welding nozzle, handheld laser cutting, the fish scale weld, and switching the welding gun to cleaning mode.
How to find an answer in the Reference guide
- Open Reference GuideFind it in the main menu of the app, the web app or the Telegram bot. No quota is used.
- Pick a sectionTheory materials, Laser machine maintenance, Problems and solutions or Laser welding.
- Go to the group or unitFor example Gas & cooling in theory, or Water cooling in maintenance. Each group shows how many articles it holds.
- Look up an alarm by codeIn Problems and solutions open Servo drives, Chiller errors or Machine alarms, pick the brand and tap the code to see causes and fixes.
Topics covered, section by section
Theory materials
- Electrics and electronics: 24V system, 380V system, computer, servo drives.
- Laser and optics: laser sources, cutting heads, height sensor, cutting lenses, beam focusing, the focus concept.
- Mechanics and frame: oil pump, rails, bed and moving portal.
- Gas and cooling: gas supply system, nozzle and gas pressure, the role of assist gas, water cooling, chiller coolant and antifreeze, dew point and condensation.
- Cutting theory and quality: power and frequency vs speed curve, multi-stage piercing in CypCut, why a laser fails to cut through metal, cut quality inspection, edge roughness, dross and mill scale.
- Material defects: cutting carbon steel, cutting stainless steel, hot- and cold-rolled steel defects.
- Safety: operator health and laser cutting fumes and dust.
Laser machine maintenance: water cooling (chiller), rack gear, laser cutting head, beam center, laser source, rails, gas proportional valve calibration, wireless pendant programming.
Problems and solutions: Fly Cut error, axis movement errors, capacitance diminished, laser source error, Fuji servo drives, chiller errors (S&A, Hanli, Tongfei, SCH-2000), machine alarms.
Sections on control software and trial software (TubesT and CypNest) are being prepared.
Reference guide access by plan
| Tool | Free | Operator | Engineer | Professional |
|---|---|---|---|---|
| Theory materials | Free | Free | Free | Free |
| Laser machine maintenance | Free | Free | Free | Free |
| Problems and solutions, error codes | Free | Free | Free | Free |
Laser welding guide: on the Free plan the nozzle selection table opens once a month, and the welding gun instructions open from the Operator plan.
Prices: Operator $3.99, Engineer $7.99, Professional $14.99 a month. Compare plans.
Questions and answers
- Can I clean a laser cutting head with compressed air?
- No. Blowing compressed air over the cutting head can damage it. Wipe the head body with 99% isopropyl alcohol on a dry synthetic non-woven cloth and replace the bottom protective glass if it has defects. The full procedure is in Laser machine maintenance in the SBM Laser Help Reference guide.
- Why does my fiber laser not cut through the metal?
- The most common reasons are a drop in laser power, dirty optics, misaligned beam spot, too high cutting speed, low assist gas pressure or a sheet thicker than the machine range. The article "Why a Laser Fails to Cut Through Metal" in the SBM Laser Help Reference guide walks through each one. For the right regime, see cutting parameters by metal and thickness.
- What does S&A chiller error E1 mean?
- On S&A CWFL chillers, E1 is the ambient temperature high alarm: the air around the chiller is above 40 °C. Blow dust out of the protective screens and the radiator and check the ambient temperature sensor. All chiller codes are in the Reference guide and on the error codes pages.
- Which chillers and servo drives are covered?
- The Reference guide covers S&A (41 codes), Hanli (21), Tongfei (16) and SCH-2000 (13) chillers, Fuji servo drives (28 codes) and 37 machine alarms, 156 codes in total.
- Is the laser machine reference guide free?
- Yes. Theory, maintenance, problems and solutions and all error codes are free on every plan, with no monthly limit. Only part of the laser welding guide needs a paid plan: the welding gun instructions open from Operator ($3.99 a month).
- How do I find the answer faster than browsing?
- Ask Find Solutions, the smart search in SBM Laser Help. Describe the problem or type the alarm code, and the answer draws on the same reference material.