12 kW fiber laser cutting chart for copper

Updated:

Short answer

At 12 kW the chart cuts copper from 1 to 10 mm: with oxygen for 1–10 mm. Speed runs from 25–30 m/min at 1 mm down to 1–1.2 m/min at 10 mm.

Cutting speed and gas pressure by thickness

ThicknessGasPressure, bar Speed, m/minPower, % Gas per 1 mFocus, mmHeight, mmNozzle
1 mm O₂525–30100
2 mm O₂520–25100
3 mm O₂616–18100
4 mm O₂810–12100
5 mm O₂86–8100
6 mm O₂84–5100
8 mm O₂102–2.5100
10 mm O₂121–1.2100

Copper cutting at different power: what each kilowatt gives

Thickness 3 kW, m/min6 kW, m/min12 kW, m/min
1 mm 26.525–3025–30
2 mm 1.815–1820–25
3 mm 3.758–1016–18
4 mm 0.65–610–12

Copper cutting charts at other power

Related questions

How thick copper can a 12 kW fiber laser cut?
The chart goes up to 10 mm, with oxygen, at 1–1.2 m/min.
Which gas to cut copper with at 12 kW?
By the chart: with oxygen for 1–10 mm. The app picks the exact mode for your machine and nozzle.
Where are focus, nozzle and cutting height?
For every row of the chart they are in the SBM Laser Help app, together with alternative modes from other sources.

Ranges are given for a typical 3–6 kW fiber machine with a clean beam path. Always verify against your machine manufacturer’s table before production.

Need the numbers for your exact machine?

See what is inside

SBM Laser Help carries cutting and piercing parameter tables by material, thickness and gas, photo diagnosis of cut defects, machine and chiller error codes, and gas consumption calculators. Free account, no card.