3 kW fiber laser cutting chart for copper

Updated:

Short answer

At 3 kW the chart cuts copper from 1 to 4 mm: with oxygen for 1–4 mm. Speed runs from 26.5 m/min at 1 mm down to 0.6 m/min at 4 mm. Thicker plate needs 6 kW, up to 8 mm.

Cutting speed and gas pressure by thickness

ThicknessGasPressure, bar Speed, m/minPower, % Gas per 1 mFocus, mmHeight, mmNozzle
1 mm O₂1226.5100
2 mm O₂51.8100
3 mm O₂133.75100
4 mm O₂100.6100

Copper cutting at different power: what each kilowatt gives

Thickness 3 kW, m/min6 kW, m/min12 kW, m/min
1 mm 26.525–3025–30
2 mm 1.815–1820–25
3 mm 3.758–1016–18
4 mm 0.65–610–12

At 3 mm, going from 3 kW to 6 kW cuts about 2.4 times faster.

Copper cutting charts at other power

Related questions

How thick copper can a 3 kW fiber laser cut?
The chart goes up to 4 mm, with oxygen, at 0.6 m/min. Thicker plate is cut at 6 kW.
Which gas to cut copper with at 3 kW?
By the chart: with oxygen for 1–4 mm. The app picks the exact mode for your machine and nozzle.
Where are focus, nozzle and cutting height?
For every row of the chart they are in the SBM Laser Help app, together with alternative modes from other sources.

Ranges are given for a typical 3–6 kW fiber machine with a clean beam path. Always verify against your machine manufacturer’s table before production.

Need the numbers for your exact machine?

See what is inside

SBM Laser Help carries cutting and piercing parameter tables by material, thickness and gas, photo diagnosis of cut defects, machine and chiller error codes, and gas consumption calculators. Free account, no card.