Cutting copper on a fiber laser

Copper is the most reflective and heat-conductive of the common metals. In our tables it is cut with high-pressure oxygen: the oxide layer helps the beam get into the reflective surface, and above a few millimetres it takes a lot of power to start and hold the cut. Beam reflection and a dark, melted edge are the typical problems. Cutting parameters by power and thickness are listed below; focus, cutting height and nozzle for each are in SBM Laser Help.

All cutting modes by metal, thickness, gas and laser power, with alternative modes, are in the SBM Laser Help parameter tables.Parameter tables in the app →

Fiber laser settings for copper by power and thickness

3 kW
1–4 mm
6 kW
1–8 mm
12 kW
1–10 mm

Cut quality problems

Need the numbers for your exact machine?

See what is inside

SBM Laser Help carries cutting and piercing parameter tables by material, thickness and gas, photo diagnosis of cut defects, machine and chiller error codes, and gas consumption calculators. Free account, no card.