Answers for whoever quotes jobs or buys the gas: how to build a cost per part from machine time, gas, electricity and consumables, how much gas a cut really uses, what oxygen against nitrogen means for the bill, and the payback maths for a nitrogen generator. SBM Laser Help has calculators for cutting time, gas consumption and cost per part.
Consumption is driven by nozzle diameter and pressure, not by the laser power: a 2.0 mm nozzle at 15 bar puts roughly 30–45 m³/h through the kerf, and a 3.0 mm nozzle at 20 bar can exceed 90 m³/h. That is why thick-plate nitrogen cutting is often the largest single line in the cost per part.
Read the answer →Oxygen burns as it cuts, so it is faster and cheaper on mild steel and reaches greater thickness, but leaves an oxidised edge. Nitrogen only blows the melt away, giving a clean, weldable, corrosion-resistant edge on stainless and aluminium at higher pressure, lower speed and much higher gas cost.
Read the answer →Cost per part is assist gas, electricity, consumables (nozzle, lens, filters) and machine time, roughly in that order of size for nitrogen jobs. On thin mild steel with oxygen, gas and consumables are cheap and machine time dominates; on thick stainless with nitrogen, gas alone can be the largest line.
Read the answer →It depends on hours cut per week and cylinder price, not on machine power. A shop running stainless several shifts a day on cylinder nitrogen often recovers a mid-size generator in one to two years; a shop cutting nitrogen only occasionally rarely breaks even.
Read the answer →SBM Laser Help carries cutting and piercing parameter tables by material, thickness and gas, photo diagnosis of cut defects, machine and chiller error codes, and gas consumption calculators. Free account, no card.