Fiber laser settings for 12 mm mild steel at 3 kW
Updated:
A 3 kW fiber laser cuts 12 mm mild steel with oxygen at 0.53–0.85 bar and 0.9–1.5 m/min. For this combination we have eight regimes: the base one from the source maker’s table and seven alternatives from other sources.
Mild steel cutting speed and gas pressure at 3 kW
Which regime to start with
- Base regime. The starting point for most 3 kW machines, from the source maker’s own table.
- Alternative 1. Faster: 1 m/min against 0.9–1 m/min. Oxygen pressure 0.3 bar higher. Source: MAX 3000W, Head: WSX 125. Try it when the cut is clean and you want more speed; if the edge gets worse, go back to the base regime.
- Alternative 2. Faster: 1.1 m/min against 0.9–1 m/min. Oxygen pressure 0.2 bar higher. Source: MAX MFSC-3000X-50um, Head: none. Try it when the cut is clean and you want more speed; if the edge gets worse, go back to the base regime.
- Alternative 3. Faster: 1 m/min against 0.9–1 m/min. Oxygen pressure 0.1 bar higher. Source: Raycus, Head: Raytools bm111. Try it when the cut is clean and you want more speed; if the edge gets worse, go back to the base regime.
- Alternative 4. Faster: 1 m/min against 0.9–1 m/min. Source: Raycus, Head: WSX. Try it when the cut is clean and you want more speed; if the edge gets worse, go back to the base regime.
- Alternative 5. Faster: 1.5 m/min against 0.9–1 m/min. Oxygen pressure 0.2 bar higher. Source: Raycus, Head: none. Try it when the cut is clean and you want more speed; if the edge gets worse, go back to the base regime.
- Alternative 6. Faster: 1.3 m/min against 0.9–1 m/min. Source: Raycus, Head: none. Try it when the cut is clean and you want more speed; if the edge gets worse, go back to the base regime.
- Alternative 7. Faster: 1 m/min against 0.9–1 m/min. Oxygen pressure 0.1 bar lower. Source: MAX, Head: Raytools. Try it when the cut is clean and you want more speed; if the edge gets worse, go back to the base regime.
Cutting time and gas consumption per metre
At these speeds one metre of cut takes about 40–67 seconds. Oxygen flow through the nozzle is about 1.4–15.4 m³ per hour, or 15–233 litres per metre of cut, not counting piercing.
Mild steel cutting speed chart: neighbouring thickness and power
| Thickness · power | Gas | Speed, m/min |
|---|---|---|
| 10 mm · 3 kW | O₂ | 1–1.3 |
| 11 mm · 3 kW | O₂ | 0.55 |
| 12 mm · 2 kW | O₂ | 0.9 |
| 12 mm · 3 kW | O₂ | 0.9–1 |
| 12 mm · 4 kW | O₂ | 1–1.2 |
| 12 mm · 6 kW | O₂ | 0.9–1 |
| 12 mm · 6 kW | O₂ | 1.9–2.1 |
| 14 mm · 3 kW | O₂ | 0.8–0.9 |
| 15 mm · 3 kW | O₂ | 0.8 |
Going from 3 kW to 4 kW gives about 16% more speed on 12 mm with oxygen. Nitrogen or air cuts about 5.8 times as fast as oxygen here, but needs 15 kW.
Common mild steel cutting defects with oxygen




Not sure which one you have? Send a photo of the edge to the app and it names the defect and the fix.
Related questions
- Can a 3 kW fiber laser cut 12 mm mild steel with nitrogen or air?
- Our tables give nitrogen or air for 12 mm mild steel starting from 15 kW, at 5–6 m/min. At 3 kW the working choice is oxygen: the burning iron adds the heat the beam alone does not have.
- What is the thickest mild steel a 3 kW fiber laser cuts?
- Our tables go up to 26 mm mild steel at 3 kW, at 0.23 m/min with oxygen. The next thickness, 30 mm, starts from 8 kW.
- Why is the speed a range?
- Sheet surface, mild steel grade, oxygen purity and the state of the protective window all shift the result. Start at the lower value, make a test cut and raise the speed in 5% steps while the bottom edge stays clean.
- Where are focus, cutting height and nozzle?
- They depend on the cutting head and lens, so a single number is often wrong for your machine. The app shows the full regime and fits it to the machine you add to your profile.